Efficient cleaning to remove high-density dust from clean rooms

Efficient cleaning to remove high-density dust from clean rooms.
Advanced HVAC air filtration system The state-of-the-art HVAC captures most dust particles. But collective dust contamination remains a problem. Dust with high density, high humidity and metal dust can easily enter the cleanroom through the tap. corrosion pipe and a dressmaker Careful measures must be taken to remove these dust particles and prevent the spread of contaminants during cleaning.

Clean the floor of the clean room.
Do not clean or wipe floors in a clean room or laboratory. when sweeping Dust will loosen and circulate in the air. Then he sat down on another surface. Traditional cloths simply blow contaminants from one place to another.

Instead, replace the broom with a high-filter vacuum cleaner. Available both as a pack and as a backpack. There are high and low vacuums. and provides flexibility to access hard-to-reach areas. Brushes must be replaced with an automatic vacuum cleaner. These machines apply the cleaner directly to the floor and provide mixing to help the vacuum cleaner release and suck up contaminants.

Clean other clean room surfaces. (table and counter)
Traditional cleaning of these surfaces includes a nebulizer and a cleaning cloth. in the case of dust It is important to follow a few special rules to prevent particles from scattering around. Always use a microfiber cleaning cloth. Also, use only a clean cloth and pad. The smart towel can be folded into four parts to make the surface of the cloth cleaner.

For starch, it is important to spray the solution on the fabric. not on the surface to prevent particles from flying into the air After removing dust Apply the solution to the surface and wipe with a clean, dry microfiber to clean the surface again.

There is a system to clean smooth surfaces instead of spray or cloth. These systems include a dosing system that delivers a cleaning solution to the microfiber tissue and wipes excess liquid from the surface.

The biggest difference between dust cleaning and other cleaning is that you need to keep dust out of the air. With just a few tweaks to your regular cleaning routine. You can effectively trap dust first. even if there is no dust It is recommended to apply a cleaner to the surface before wiping.